Slippery Algae on Paths: How to Reduce the Risk

Slippery algae on paths and exterior surfaces treated with Wilton Technology Algae Remover

Slippery algae on paths can become much more than an appearance problem. During wet weather, algae growth on pathways, steps, entrances and other exterior surfaces can contribute to slippery conditions and increase the risk of slips around workplaces, commercial premises and homes.

Ireland’s damp climate can provide favourable conditions for algae growth, particularly on surfaces that remain wet, shaded or receive limited sunlight.

A pathway may initially develop a light green discolouration, but if the growth is allowed to develop, the surface can become increasingly unsightly and potentially slippery when wet.

Why Does Algae Grow on Paths?

Algae thrives where moisture is regularly present. Shaded pathways, north-facing areas, entrances, steps and surfaces close to trees or vegetation can be particularly susceptible.

Exterior surfaces can also remain damp for considerable periods during autumn and winter, creating conditions in which biological growth can develop.

Regularly inspecting these areas allows algae growth to be identified before it becomes a more significant problem.

Algae Can Be More Than an Appearance Problem

A green pathway may look neglected, but appearance isn’t the only consideration.

When algae becomes wet, affected pedestrian surfaces can become slippery. This is particularly important around:

  • Building entrances and exits
  • Pedestrian pathways
  • Steps
  • Yards
  • Ramps and access routes
  • Frequently used outdoor areas

For businesses and facilities managers, exterior cleaning should therefore form part of regular property inspection and maintenance.

How Can You Treat Algae on Paths?

Simply removing visible growth doesn’t always provide a lasting answer. Where algae is the problem, using an appropriate algae treatment can help tackle the biological growth rather than simply improving the immediate appearance of the surface.

Wilton Technology’s Algae Remover (technical name Roloxid 10) is designed for the treatment of algae on suitable exterior surfaces.

It can be used on surfaces including concrete, pathways, roofs, timber decking, tiles and tarmacadam drives, as well as other suitable exterior surfaces.

The correct application will depend on the surface, the extent of the growth and the manufacturer’s directions for use.

Regular Inspection Can Make a Difference

Don’t wait until a pathway is heavily covered in green growth before taking action.

Regular inspection and appropriate treatment can help:

  • Improve the appearance of exterior surfaces
  • Control algae growth
  • Reduce the build-up of slippery contamination
  • Extend the time between major cleaning
  • Keep entrances, pathways and other pedestrian areas better maintained

Autumn is an especially useful time to inspect outdoor pedestrian areas before wetter weather becomes established.

Treat the Cause, Not Just What You Can See

Pressure washing can make a pathway look dramatically cleaner, but where biological growth is responsible for the problem, cleaning the visible surface alone may not prevent it from returning.

Using a suitable algae treatment provides a more targeted approach.

The principle is straightforward:

Don’t just remove what you can see — treat the growth responsible for the problem.

Need Advice on Algae Removal?

Choosing the correct product and application method will depend on the type of surface and the severity of the algae growth.

Wilton Technology has been supplying professional cleaning and hygiene products since 1988.

If you have algae on pathways, steps, decking, roofs or other exterior surfaces and are unsure about the appropriate treatment, contact us and we’ll be happy to advise you.

Wilton Technology – Cleaning & Hygiene Supplies
Tel: 021 4810688
Email: sales@wiltontech.ie 

Leave a Reply

Your email address will not be published. Required fields are marked *

Get a Quick Quote