
CLP hazard pictograms appear on the labels of many professional cleaning chemicals. These red diamond-shaped symbols are not decoration: they provide an immediate warning about the hazards associated with a product.
Recognising the symbols helps cleaners select, handle, use and store chemicals safely. However, a pictogram is only part of the safety information. Always read the complete product label and Safety Data Sheet before using any cleaning chemical.
What are CLP hazard pictograms?
CLP stands for Classification, Labelling and Packaging. The CLP system uses standardised pictograms, signal words, hazard statements and precautionary statements to communicate the risks associated with hazardous substances and mixtures.
The same pictogram can sometimes represent several related hazards. Therefore, cleaners should never rely on the symbol alone. The accompanying instructions explain the specific hazard and the precautions required.
The European Chemicals Agency provides further information in its official guide to CLP hazard pictograms.
What do the nine CLP hazard pictograms mean?
The nine CLP hazard pictograms are:
- Explosive: The product may explode under certain conditions, particularly when exposed to heat, shock or friction.
- Flammable: The product can ignite easily and must be kept away from heat, flames and other ignition sources.
- Oxidising: The chemical may cause or intensify a fire, even though the product itself may not be combustible.
- Gas under pressure: The container contains pressurised gas and may burst if heated. Refrigerated gases can also cause cold burns.
- Corrosive: The product may cause severe skin burns and serious eye damage. It may also corrode certain metals.
- Acute toxicity: Even limited exposure may cause serious poisoning and could be fatal.
- Harmful or irritant: The product may cause skin or eye irritation, an allergic skin reaction, drowsiness or other harmful effects.
- Serious health hazard: The chemical may cause severe or long-term health effects, including organ damage, breathing sensitisation or other chronic health problems.
- Hazardous to the environment: The product may be harmful or toxic to aquatic life and must be handled and disposed of carefully.
Safety checks before using cleaning chemicals
Professional cleaners should always:
- Read the complete product label.
- Check that the chemical is suitable for the intended surface and cleaning task.
- Follow the recommended dilution and application instructions.
- Wear the specified personal protective equipment.
- Consult the Safety Data Sheet when required.
- Store the product securely in its original, correctly labelled container.
- Never mix cleaning chemicals unless the manufacturer specifically states that it is safe.
Mixing incompatible products can release hazardous gases or generate heat. This is particularly important when handling bleach or chlorine-based products. Read our related guidance on why you should never mix cleaning chemicals.
Why CLP chemical safety labels matter
Taking a few seconds to read a chemical label can prevent injury, damaged surfaces and potentially dangerous reactions. Cleaning teams should receive appropriate training and know where to find product labels and Safety Data Sheets.
Wilton Technology supplies professional cleaning and hygiene products in Cork and throughout Ireland. If you need assistance selecting an appropriate product, understanding dilution instructions or locating an SDS, contact our team at sales@wiltontech.ie.

