ROLOXID 10 is a highly concentrated product to remove and protect against algae and moss growth on walls, roofs, paths, patio's, gravestones etc.
Using ROLOXID 10 prevents dangerous situations caused by algae growth like slippery surfaces. The use of ROLOXID 10 prevents also damaging of roof tiles, concrete and brickwork caused by algae growth.

The roots of algae and moss penetrate into the pores of roof tiles, brickwork, concrete etc. When the water in the roots freezes, the material will crack. These cracks will get bigger every year.

ROLOXID 10 is economical in use, easy to apply and very effective. One application destroys the algae and moss growth and prevents further growth for at least six months. ROLOXID 10 can be also being used on metal, wood and plastic. ROLOXID 10 is not corrosive.

ROLOXID 10 can also be used to destroy algae and prevent further growth in water-cooling systems. Using ROLOXID 10 in these systems will prevent blocking caused by algae growth.

Directions

For use on walls, roofs, paths, patio's, gravestones etc.

For use in water cooling systems:

1. Start of the water treatment.
   Dose 2 litre of ROLOXID 10 on 10.000 litres of water (20 ppm active ingredients). Repeat this treatment every 7 days. In case the result is not satisfying raise the concentration to 4 litres ROLOXID 10 on 10.000 litres of water (40 ppm active ingredients) every 7 days.
2. Continuous treatment:
   If it appears that the start concentration was effective, than lower the concentration to 1 litre ROLOXID 10 to 10.000 litres of water (10 ppm active ingredients) every 7 days. When the algae growth increases raise the concentration.

   Dilute the recommended amount of ROLOXID 10 in a bucket with 8-10 litres of water and add it to the water-cooling system. In case the water of the water-cooling system. In case the water of the water-cooling system is heavily polluted, clean system first.

Technical data

Safety Precautions

• Wear suitable gloves and eye protection.
• In case of contact with the eyes and/or skin rinse immediately with plenty of water.
• Take off immediately all contaminated clothing.
• Contains: didecyl dimethyl

Approval numbers

The Netherlands: 9011 N.
United Kingdom: HSE 2556.

ADR CLASS: 8,66 b
IMDG CLASS: 8
UN no: 1903

< BACK TO ROLITH DETERGENTS