ROLITEXis a paint and glue remover based on non flammable solvents, suitable for quickly removing lacquer layers like acrylates, polyurethane's, polyester lacquers etc. from wood, brick and metal. ROLITEX is also extremely suitable to remove carpet glue residues from floors.

ROLITEX quickly breaks the connection between the lacquer layers or glue residues and the surface, without attacking materials like concrete, wood, metal etc.

ROLITEX is not corrosive. It has a low evaporation-rate which prevents ROLITEX from drying in too quickly. Because of its paste form, ROLITEX is also suitable for applying on vertical surfaces.

Directions

Paint removing:
Apply ROLITEX with a brush on the surface to be treated.
Depending on the thickness and the kind of the paint layer take care of the following activation times:

• Normal: 2 to 6 minutes
• Extreme: up to 15 minutes

Rinse thoroughly afterwards with clean water eventually with the addition of a degreaser i.e. MC 88 or treat it with a cloth steeped with thinner. Repeat treatment if necessary, but leave surface to dry first. Never moisten wood or veneer, use a damp cloth.

Glue removing:
Apply ROLITEX with a brush on the surface to be treated. After an activation time of 20 to 35 minutes, remove ROLITEX with the glue residues with the help of a stopping knife.
Rinse thoroughly afterwards with a clean water eventually with the addition of a degreaser i.e. MC 88.

ROLITEX cannot be used on plastics.

After use, residues of ROLITEX have to be handled as chemical waste.

Technical data

Safety Precautions

• Keep out of reach of children
• Store in well closed package
• Avoid contact with the skin
• Harmful by inhalation and if swallowed

ADR: CLASS 6.1,15c
IMDG: CLASS 6.1
UNnr: 1593

< BACK TO ROLITH DETERGENTS