BEITSTA is a concentrated, acid product for cleaning aluminium and stainless steel surfaces, like window frames, tanks, reactors, pipes etc.
Oxidation, dirt, lime-scale and atmospheric pollution can be removed quickly and safely with BEITSTA, without leaving spots behind.

Directions

Depending on the pollution BEITSTA can be diluted as follows:

• Slight to medium pollution 1:5 - 1:10
• Medium to heavy pollution 1:1 - 1:5

Wash the surface to be treated from the bottom to the top with the recommended BEITSTA solution.

In case of heavy pollution leave to activate for 3 to 5 minutes and brush if necessary. Rinse the treated surface afterwards always with clean water, again from the bottom to the top. Repeat treatment if necessary. Avoid the product drying before it is rinsed with clean water. Do not bring BEITSTA into contact with glass before this is moistened.

Avoid contact with galvanised and zinc surface and also with marble and travertine.

Technical data

Safety Precautions

• In case of contact with the eyes rinse immediately with plenty of water and seek medical advice.
• causes burns

ADR Class: 8,11c
IMDG Class: 8
UN no:1805

< BACK TO ROLITH DETERGENTS